What are embedded design services and why outsource them?

Embedded design services cover everything needed to turn a product idea into working electronics — hardware, firmware, PCB, connectivity and manufacturing. Outsourcing to a specialist like AIOTHUB gives you a full, experienced engineering team on demand without the cost and time of building one in-house, and a single partner accountable for the whole product.

Do you handle both hardware and firmware?

Yes. Our hardware, firmware and cloud engineers work as one team, so your circuit design, embedded software and connectivity are developed together and validated as a complete system rather than handed between separate vendors.

Can you take my product from prototype to mass production?

Absolutely. Our End-to-End Product Engineering service covers concept, prototyping, testing, certification support and pilot to-volume manufacturing — plus ongoing maintenance and upgrades after launch.

What is a typical timeline for a prototype?

It depends on complexity, but a functional engineering prototype typically takes around 8 weeks from a finalized specification. We share a precise timeline after the discovery and requirements stage.

Do you offer white-label / OEM manufacturing?

Yes. You can ship proven AIOTHUB hardware under your own brand with custom firmware, branded enclosures and a private-label cloud dashboard — a fast route to market without building electronics from scratch.

How do we get started or request a quote?

Share your project brief using the form below — what you want to build, target parameters, connectivity and volumes. Our engineers will recommend the right scope and send you a tailored quote and timeline.

Embedded Design & IoT Product Engineering

One team for the entire product, not five vendors.

Most companies building an electronic product end up juggling a hardware consultant, a firmware freelancer, a PCB house, an enclosure vendor, and a cloud developer. Every handover costs weeks. Every bug becomes somebody else's problem.

Talk to Our Engineers Explore our services

Hardware, firmware, PCB, and cloud engineers in the same room.

AIOTHUB is an embedded design and IoT product engineering company based in Vadodara, Gujarat. You get one point of contact, one timeline, and one team that owns the product end to end.

Because we manufacture our own industrial data loggers, we design for what actually happens after shipping — heat, dust, voltage spikes, weak network coverage, and certification audits. That experience goes into every client project we take on.

What we design

Seven services. Take one, or all of them.

Most clients start with a prototype and stay through production.

Embedded Hardware Design

Circuits designed around what the product must survive — plant floors, cold rooms, dirty power, years of uptime.

Explore service

Firmware Development Services

Bare-metal and RTOS firmware that runs for years without a reset — the part your customer never has to think about.

Explore service

IoT Product Development

Device, network and dashboard designed together, so the data your hardware captures reaches the people who act on it.

Explore service

PCB Design & Layout Services

Multi-layer layout done for manufacturability — checked against your fabricator's real capability, not an ideal one.

Explore service

OEM / White-Label Services

Ship a proven AIOTHUB platform under your own brand. The risky engineering is already done and field-tested.

Explore service

Prototype Development

A working unit you can put in front of a customer, an investor or a test lab — before you commit to tooling.

Explore service

End-to-End Product Engineering

One team accountable from the first requirement to the unit on the shelf. No handoff gaps between the hardware vendor, the firmware contractor and the app agency — because there is only one of us.

Check Full Details

How we work

A process that keeps you out of the dark.

Discovery & Requirements

We map goals, constraints, sensors, connectivity and compliance needs into a clear, finalized engineering specification document.

Architecture & Design

Our engineers define the system architecture, select optimal components, create schematics, and design the multi-layer PCB layout.

Prototype & Validate

We fabricate the boards, assemble them in our lab, bring them up with firmware, and run strict bench-tests on functional prototypes.

Firmware & Integration

We write and refine bare-metal or RTOS software and secure drivers, connecting your hardware to local radios and cloud pipelines.

Testing & Certification

We perform environmental, thermal, and electrical pre-compliance trials, supporting you through CE, FCC, or BIS regulatory approval.

Production & Support

We transition your design to mass production with custom calibration jigs, manufacturing packs, pilot batches, and lifecycle updates.

Why AIOTHUB

Why choose us for embedded design

We build our own products

We are not a consultancy that has never shipped. AIOTHUB designs, manufactures, and supports its own line of industrial data loggers. We know what breaks after 18 months in a hot, dusty plant — because we have supported it.

One team, no finger-pointing

Hardware, firmware, and cloud in one team. If a sensor reading is wrong, one team debugs the sensor, the firmware, the protocol, and the dashboard until it isn't.

100% Made in India

Local design, local sourcing, local support. Faster iterations, easier customisation, no time-zone delays, and no import lead times for revisions.

Industrial-grade by default

IP-rated enclosures, wide temperature ranges, surge and reverse-polarity protection, and offline data buffering are our normal starting point, not premium add-ons.

Compliance-aware engineering

We build with audits in mind — time-stamped records, exportable data, access control, and documentation practices suited to regulated industries.

Your IP stays yours

NDA from day one. Designs, source code, and documentation are handed over as agreed in the contract. No lock-in.

Have a product idea? Let's engineer it properly.

Share what you want to build — the parameters, the environment, the volume, the timeline. Our engineers will tell you honestly what's feasible, what it will take, and what it should cost. No obligation, no jargon.

Talk to Our Engineers Request a Callback

FAQ

Frequently asked questions

What are embedded design services?

Embedded design services cover the engineering work needed to create an electronic product with a microcontroller inside it — circuit and hardware design, PCB layout, firmware programming, testing, and preparation for manufacturing. At AIOTHUB we extend this to include cloud connectivity and dashboards, so you receive a complete, connected product rather than just a board.

Do you work with startups, or only established manufacturers?

Both. We work with startups validating a first product through prototype development, and with established manufacturers who need one specific capability like PCB layout or firmware development. Engagements can start small with a proof of concept and scale into full end-to-end product engineering.

Can you take over a project another team started?

Yes. We regularly review and continue existing designs. We begin with a technical audit of your current schematics, layout, or firmware, tell you honestly what is reusable and what needs rework, then proceed on an agreed plan.

Who owns the intellectual property?

You do. We work under NDA from the first conversation, and IP ownership terms are documented in the agreement before work starts. On full custom development, design files, source code, and documentation are handed over as agreed.

How long does an embedded product take to develop?

It depends on complexity. A working prototype of a straightforward sensor-based device typically takes a few weeks, while a complete industrial product with certification and production readiness usually takes several months. After discovery we give you a realistic, milestone-based schedule rather than an optimistic guess.

Do you also manufacture, or only design?

We do both. AIOTHUB manufactures its own industrial data loggers in India and can handle pilot batches and volume production for client products, including testing, quality checks, and packaging. If you prefer to manufacture elsewhere, we hand over complete production-ready documentation.

What is the difference between your OEM service and custom development?

OEM and white-label puts your brand on our proven, ready platform with customisation on top — the fastest, lowest-risk route to market. Custom development builds a new product from scratch to your specification: longer, but completely unique to you. Many customers start with OEM and move to custom later.

Do you provide support after the product is delivered?

Yes. Ongoing support covers firmware updates, bug fixes, feature additions, component obsolescence handling, and technical assistance for your team. Terms are agreed as part of the engagement.

Where are you located, and do you work with clients outside Gujarat?

We are based in Vadodara, Gujarat, and work with clients across India and internationally. Most collaboration happens over calls and shared documentation, with site visits arranged when a project requires them.